Sgt.Gator
Well-known member
BendPak 4 post HD-9XW. Used, manufactured in 2011.
9,000-lb. Capacity / Four-Post Lift / Standard Width / High Lift. 220Volt
The HD-9XW is a standard width, extra-tall lift that offers ample overhead clearance and enough side room to park light-duty trucks, SUVs and virtually all low ground-clearance vehicles. It has an 82" rise, I'm 6'4" and can walk under the lift without smashing my head.
Includes:
BendPak RJ45 rolling bridge jack is designed to hold up to 4,500 lbs. and features easy-to-roll wheels that make sliding simple between the four-post lift runways. A rolling bridge jack is the only way to turn a four-post lift into a full-service car lift. The jack lifts one-half of your car to raise two wheels off the runways. The car needs 4" of ground clearance to go over the rolling jack. If you have less then you put long boards on the runways to lift the car to the min required.
Caster Kit: Portable Wheel Kit / Fits HD-7 and HD-9 Series Four-Post Lifts / SET OF 4. Mobilize your BendPak HD-9 series four-post lift with this high-quality caster kit. Move your lift all around the shop and avoid inconvenient teardown and re-assembly time.
Race Ramps modified to allow low clearance cars to drive up on the lift.
Custom runway safety blocks to prevent a car from rolling off the lift.
5x drip trays.
Total for $3,900
You will need to disassemble the lift and transport it at your expense. You will probably need a rental forklift to remove and reassemble it safely. Located in Bend Oregon. Or hire a professional lift mover. Jon at Johnny's Tool & Equipment, 541-815-7794, here in Bend did my installation 15 years ago and I've verified that he's still in business and can disassemble it for you.
9,000-lb. Capacity / Four-Post Lift / Standard Width / High Lift. 220Volt
The HD-9XW is a standard width, extra-tall lift that offers ample overhead clearance and enough side room to park light-duty trucks, SUVs and virtually all low ground-clearance vehicles. It has an 82" rise, I'm 6'4" and can walk under the lift without smashing my head.
Includes:
BendPak RJ45 rolling bridge jack is designed to hold up to 4,500 lbs. and features easy-to-roll wheels that make sliding simple between the four-post lift runways. A rolling bridge jack is the only way to turn a four-post lift into a full-service car lift. The jack lifts one-half of your car to raise two wheels off the runways. The car needs 4" of ground clearance to go over the rolling jack. If you have less then you put long boards on the runways to lift the car to the min required.
Caster Kit: Portable Wheel Kit / Fits HD-7 and HD-9 Series Four-Post Lifts / SET OF 4. Mobilize your BendPak HD-9 series four-post lift with this high-quality caster kit. Move your lift all around the shop and avoid inconvenient teardown and re-assembly time.
Race Ramps modified to allow low clearance cars to drive up on the lift.
Custom runway safety blocks to prevent a car from rolling off the lift.
5x drip trays.
Total for $3,900
You will need to disassemble the lift and transport it at your expense. You will probably need a rental forklift to remove and reassemble it safely. Located in Bend Oregon. Or hire a professional lift mover. Jon at Johnny's Tool & Equipment, 541-815-7794, here in Bend did my installation 15 years ago and I've verified that he's still in business and can disassemble it for you.
Last edited: