Greg Miller
Well-known member
This is a unit only used as a demo. It connects to 115VAC single phase and runs a 230V 3 phase motor at any speed you desire.
https://hvacr-drives.com/component/content/35.html?task=view is link to the web site.
The model # is SKB1100110 rated for a 3 phase motor up to 5.2A at 230V.
Input current at 115VAC to run a 5.2A 3 phase motor is 24A.
You cannot run a single phase motor with this unit. But if you have a blower that uses a 1 1/2HP motor or less and want it to be adjustable this unit and a 3 phase motor will do the trick.
My cost was $198. I would let it go for $100.
It could be used for a lathe or drill press as well if you bought one of those surplus and don't have 3 phase at home.
Email me with any questions - variable speed drives are what I do -
gmiller@ccnw dot com
https://hvacr-drives.com/component/content/35.html?task=view is link to the web site.
The model # is SKB1100110 rated for a 3 phase motor up to 5.2A at 230V.
Input current at 115VAC to run a 5.2A 3 phase motor is 24A.
You cannot run a single phase motor with this unit. But if you have a blower that uses a 1 1/2HP motor or less and want it to be adjustable this unit and a 3 phase motor will do the trick.
My cost was $198. I would let it go for $100.
It could be used for a lathe or drill press as well if you bought one of those surplus and don't have 3 phase at home.
Email me with any questions - variable speed drives are what I do -
gmiller@ccnw dot com