AAF/Hard Motor Sport The Place To Go For Pro3 Parts And Fabrication!

ahardm3

Member
We have been developing parts for e30 race application for years now and finally decided to bring a few them to market.
ALL OF THESE PARTS WILL BE USED AND HAVE BEEN USED IN OUR CARS

This is what we are most proud of!

The AAF RACE E30 REAR SWAY BAR
This Bar is becoming the standard in Pro3

404395_360599710638077_145774452120605_1160360_29194871_n.jpg

420719_360599173971464_145774452120605_1160358_1747617811_n.jpg

2012-02-13165431-1.jpg

2012-02-13165458-1.jpg

2012-02-13165552-1.jpg



We at AAF have tried every bar that we could get for the rear of our E30 Pro3 race cars and we were left wanting every time! That's when our new 16mm bar was born. The other bars on the market are ether to stiff or only have two or three hole to pick from. The other thing that we found is many of the bar would bind at our low ride heights. We wanted a bar that would just work so we built our own! At the stiffest settings it makes have car as loose as any of our drivers ever wanted it and on the ruff road courses when you need more give the softest setting works great. It is the best range of adjustment in any rear bar we have tried. So if you are like most of the racers we work with and you go around with your rear bar just unhooked give our bar a try.

PERFECT FOR SPEC E30 AND PRO3!

http://www.hardmotorsport.com/AAF-RACE-E30-REAR-SWAY-BAR-AAFE30REARSWY.htm

AAF E30 OEM BACKING PLATES

6c9f5c72.jpg

37df7330.jpg


The E30 design has features our large "Pocket" to allow for more air flow into the proper place you need it the brake hat, so the air will travel through the vents in the rotor. Also the plate is the same size as the rotor to retain a heat shield from your shocks to prevent heating of your shock oil which will change your dampening setting do to thinning the oil, also protect your ball joints from heat and wear.

http://www.hardmotorsport.com/AAF-E30-OEM-BACKING-PLATES-HMSE30OEMBACK.htm

AAF E30 Rear Sub Frame and Diff Mount

64714_368783066486408_145774452120605_1181312_889207139_n.jpg


AAF E30 Rear sub frame and dif mount a must for Spec E30 and Pro3
http://www.hardmotorsport.com/AAF-E30-Rear-sub-frame-and-dif-mount-AAFE30REARSUBMNTDIFF.htm

AAF E30 Front Subframe HD Reinforcement Kit

4357fcff.jpg


http://www.hardmotorsport.com/AAF-E30-Front-Subframe-HD-reinforcment-kit-AAFE30FRSUBRE.htm

AAF PRO3 Solid Aluminum Motor and Tranny Mounts E30

2012-01-23172706.jpg



http://www.hardmotorsport.com/AAF-P...r-and-Tranny-Mounts-E30-AAFPRO3SOLIDMOUNT.htm
 
Last edited:
Back
Top